2 by XP, the versatile detector for all situations!!
Thanks to its 4,6 kHz search frequency, the G-Maxx II is a powerful and versatile
detector for coins and significant objects in various types of
An important flexibility in the set up allows you to fit in with the ground you
wish prospect, thanks to the Multi-Tones mode,
the IRON LEVEL and the new IRON THRESHOLD adjustements.
chose instantaneous sound signalling, rather than a LCD display
because of the extraordinary faculties of analysis of the human
ear compared to an LCD display.
LCD displays cannot respond in real time and do not capture weak
signals that are too brief or too close to other signals.
G-Maxx II sound signalling provides real-time
output of the most imperceptible signal.
Our detectors use wide scan search heads (Double
D), because this coil geometry allows a better grounds penetration.
You will appreciate the sturdiness and the manufacturing
quality of our equipment. Because a metal detector is generally
used in extreme conditions, we have given full attention to the
most sensitive parts. G-Maxx is being developed and manufactured
with quality components and material, thus ensuring your XP detector
a maximum useful life.
This evolution of the G-Maxx XP detector profits
from a completely new electronic circuit, having new functions
such as :
The wireless headphone : the transmitter is now integrated on the
circuit boards of these four new detectors. It has been designed
with two switchable channels. A FREQ SHIFT switch on the front
of the detectors enables the two output channels to be toggled
quickly and easily: CH 1 or CH 2.
Changing frequency : a new switch (FREQ SHIFT)
enables the detection frequency (Freq. 1 or Freq. 2) to be set
to reduce any interference from other XP devices being used nearby.
New analogical filters improving the detection
of targets in iron infested areas. The masking circle generated
by the iron is greatly reduced. Targets of interest in iron infested
areas can therefore be detected more easily, thus enabling sweeping
operations to be carried out more quickly.
We have also improved the gradation of the sensitivity settings,
which are now far more precise. We have "zoomed
in" on the range of sensitivity settings, enabling greater fine-tuning in your adjustments
giving you the easiest possible sensitivity adjustments.
The G-Maxx II is still a "multi-tone" detector,
but user can now adjust the iron level setting by using the IRON
THRESHOLD potentiometer. This potentiometer can be viewed as a
detection setting with a range only covering iron. It has fine-tuning
settings ranging from 0 to 20.
At 0, all iron sounds at medium pitch. The higher the setting,
the lower the pitch for detected iron.
This, for example, enables small nails just to be picked up at
a low pitch, whereas larger ones will be detected at medium pitch.
As you will doubtless already know, too high a level of discrimination
can hinder the performance of a detector.
This setting was previously preset at alevel suited to the majority
of users. But most of the time, beginners do not want iron to register
on their machines, whereas more advanced users prefer to have this
option to make it easier to detect targets on difficult terrain.
The GROUND, SILENCER, IRON VOLUME (previously
Level) settings remain unchanged.
New 9” coil made with carbon fibre including a newly
designed coil cover
Very resistant cable, conceived to resist to movements constraints
XP Connector top of the range, completely waterproof
Light and robust ABS electronic box . For a maximum comfort, the
box is worn hip mounted (Hipmount bag provided). It can also be
fixed under the armrest.
Light detector and perfectly balanced
3 parts shaft with twin locking collar system
Fibreglass lower stem
New versatile hipmount bag doubling as a control box cover
Frequency : 4,6 Khz.
Mode : Motion
Multi-tone discrimination in ALL METAL mode
Microprocessor analysis of signals
Volume control for low Tone (iron volume)
New fine-tuning using “IRON THRESHOLD” allows you to identify iron
as a low tone very precisely, giving YOU control
IGround Balance : adjustable
SILENCER switch : 3 position to limit iron false signals
Wireless headphone transmitter (new 2 channel version) already built
into the circuit boards of these four new detectors.
New FREQ SHIFT switch on the front of the detectors to reduce any interference
from other XP machines being used nearby.
- Change the channel of the Wireless headphone (ch1/ch2)
- Change the frequency of the detector (Freq 1/ Freq 2)
Improved graduation of the sensitivity settings
New powerful, entirely reworked circuit board, combining performance
together with higher sensitivity to winkle out the ‘goodies’.
Faster recovery than previous models enabling you to find deeper targets
Power : 8 Alkaline batteries 1.5Volts AA or rechargeable NiMh pack.
Battery life : alkaline : 45 hours - Battery : 45 hours (2300 mAh NiMh)
Battery low alert
Coil cover, backphone FX-01 and Hipmount bag provided
Onboard 240v charging via coil socket charges all 8 batteries
at once for convenience
Rechargeable Nimh Batteries
Search coil 27 cm, Elliptical 24x11cm, 38x45 cm and concentric 25/21cm
2 years : Electronic box.
1 year : Search coil.